...
Both primary panels will be fabricated in one work session. The setup, fabrication, and vacuum bagging time is ~120min for each panel. The part must remain in an appropriated ventilated area while under vacuum for the specified curing time. Once cured, the sealed part may be removed and placed into the NER bay for ~1 week to fully cure.
Nosecone Top Panel [
...
4 hrs active, 1 week passive]
The top panel will be fabricated in one work session. The setup, fabrication, and vacuum bagging time is ~180 ~240 minutes. The part must remain in an appropriated ventilated area while under vacuum for the specified curing time. Once cured, the sealed part may be removed and placed into the NER bay for ~1 week to fully cure.
...