Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Download Bambu Studio (it’s free)

  2. Select region

    image-20240930-022846.pngImage Added

  3. You don’t have to join the program

    image-20240930-022927.pngImage Added

  4. Make sure the “Bambu Lab P1P” Printer with the 0.4 Nozzle is selected and click “Next”. You don’t have to worry about unselecting everything else.

    image-20240930-023053.pngImage Added

  5. Filament selection page doesn’t matter too much, these are just the options that will show up on the slicer in the future so you could just leave the default and click “Next”. If you want to clear your screen a bit just have the following selected:

    image-20240930-023706.pngImage Added

  6. Have this box check and click “Finish”

    image-20240930-023914.pngImage Added

  7. Click “Login/Register” in the upper left and login with Google using nershipping@gmail.com and Racecar202 for the password

    image-20240930-024314.pngImage Added

  8. You should now see the “NER 3D Printing” user profile in the top left corner

    image-20240930-024430.pngImage Added