...
Turn on the machine with the switch on the right side.
...
Open the laptop connected to the machine and open the ProtoMAX MAKE software. Make sure the USB is connecting the machine to the laptop.
Click on the red home button to move the nozzle of the machine to its home point.
Set the machine zero to this home position by clicking zero for the User Home position. (User Home is the machine’s zero and Path Start is the zero of your part’s cut path)
...
Put your stock on the bed of the machine lining the bottom left corner up with the machine’s bottom and secure it down. (For fusible links, use the small magnets to hold the aluminum down.
...
Jog the nozzle using the arrow keys to put it where you want the path zero to be then click zero for the Path Start position.
...
do dry run
set z height
...
...
make sure tube is connected to nozzle head
...
and flip lemon down
...
close lid
run
...
rinse part and take it out