...
Fusible Link Specific Settings
...
Carbon Fiber Settings
| Note |
|---|
The more plies in a layup, the greater the risk of delamination during waterjetting. If this is a concern, drill starting holes prior to waterjetting to reduce the risk. |
All tests cut a
| Eazy math inline | ||
|---|---|---|
|
| Eazy math inline | ||
|---|---|---|
|
2 Ply 3K 2x2 Twill Weave Panel
...
Settings | Value |
|---|---|
Line Quality | 5 |
Material | Carbon Fiber Laminate |
Thickness | 0.035 (check Carbon Fiber Reference Values) |
Measured Diameter:
| Eazy math inline | ||
|---|---|---|
|
Measured Length:
| Eazy math inline | ||
|---|---|---|
|
Clean edges, no warping or delamination.
2 Ply 3K 2x2 Twill Weave Honeycomb Core Panel
...
Settings | Value |
|---|---|
Line Quality | 5 |
Material | Carbon Fiber Laminate |
Thickness | 0.26 (check Carbon Fiber Reference Values) |
Measured Diameter:
| Eazy math inline | ||
|---|---|---|
|
Measured Length:
| Eazy math inline | ||
|---|---|---|
|
Topmost skin cut cleanly. The honeycomb core deflected the water a bit causing ridges on the bottom skin. Recommend sanding down after cutting.