...
All airfoils and endplates are separate parts that will be screwed together.
...
Front Plate Dimensions:
23”x12”x0.25”
20”x8”x0.25”
4.75”x6”x0.25”
Front Airfoil Dimensions:
15”x12.5”x2.5”
15”x8.5”x1.5”
8.4”x6.25”x1”
Rear Plate Dimensions: 24”x31”0.25”
Rear Airfoil Dimensions:
14”x3.5”x40”
8.5”x1.5”x40”
6.25”x1.25”x40”
Materials
Fabric
2x2 twill 3k carbon fiber fabric
...
The nosecone consists of two primary panels and a top panel. The sidepod is one piece.
...
Nosecone primary panels: 36”x22”x5”
Nosecone top panel: 50”x28”x22”
Sidepods: 36”x12.5”x11.15”
Materials
Fabric
2x2 twill 3k carbon fiber fabric
...
High-Level Procedure
Taking place early December 2023 or January 2024
Mold [2hr active]
The mold will be covered in gelcoat. The setup and fabrication time should take ~1 hour, and the gel coat will cure in ~45 minutes. Mold will be fabricated and stored in a ventilated area during curing and removed once curing completes.
...