It’s time to upgrade! Here is our internal summary of how to install/upgrade Solidworks 2022-23.

CONTENTS

Install/Upgrade Instructions

Here’s a broad “Get Started” guide for installing Solidworks 2022-23!

This is assuming you are a COE student. If you are not you will have to request a license.

Navigate to the NU COE SEK download page: https://coe.northeastern.edu/computer/coe-solidworks-download/
Click “Please Login” if it doesn’t automatically sign in
1. This will bring you to the single sign on (SSO) system.
2. You’ll probably need to approve via 2FA
Click “Add Answer”
Select “Yes” and click “Next”
You now have your code! Please save this somewhere in case you need it in the future (and for right now).
Download the SEK installer from Solidworks
1. Go here: https://www.solidworks.com/support/community-download#no-back (solidworks.com/sek)
2. Fill out your info
3. Indicate that you have a serial number and select the “2022-2023” version
4. Click “Request Download”
5. Click Agree
Once downloaded, opening the installer will yield and unzipper, and once unzipped, the Solidworks Installation Manager will open!
From here just follow the steps and enter your serial number when prompted
1. Note, you will only need to enter it under “Solidworks”, and it will automatically unlock the add-on products without additional serial numbers

Configuring PDM Professional vs Standard

By default, Solidworks Installation Manager (IM) wants to install PDM Pro. This is not right! We use PDM Standard.

Next to “SOLIDWORKS PDM” click “Change ✏️ “
Switch to PDM standard
1. Your configuration should probably match the following:

This is caused by Solidworks Electrical. For now, we aren’t using SWE, so we can just disable it.