P1P Bambu Printer
Build Plate Size: 256 × 256 × 256 mm³
Supported Filaments: PLA, PETG, TPU, PVA, PET; Enclosure required: PA, PC, ABS, ASA
Printing Instructions
Download Bambu Studio (it’s free)
Select region
You don’t have to join the program
Make sure the “Bambu Lab P1P” Printer with the 0.4 Nozzle is selected and click “Next”. You don’t have to worry about unselecting everything else.
Filament selection page doesn’t matter too much, these are just the options that will show up on the slicer in the future so you could just leave the default and click “Next”. If you want to clear your screen a bit just have the following selected:
Have this box check and click “Finish”
Click “Login/Register” in the upper left and login with Google using nershipping@gmail.com and Racecar202 for the password
You should now see the “NER 3D Printing” user profile in the top left corner