NK Labs Waterjet Guide

Owned by Walter Stadolnik (Unlicensed)
Feb 26, 2024
1 min read

Waterjet Guidelines Doc: https://docs.google.com/document/d/1u1cx24yFMLRDb6o82qT53pbs3-h_LcF2aTDMhXrfu4Q/edit?usp=sharing

Waterjet Part Planning Spreadsheet: https://docs.google.com/spreadsheets/d/1vs_amSK5wn_psoTBg5nvnO9vfir4hkgQA5b48opqke0/edit?usp=sharing

Waterjet DXF folder: https://drive.google.com/drive/folders/11KdwH-Sfj7cUwm9YZZbyHJemKEABNB85?usp=sharing

 

General Procedure:

  • Order stock, following the guidelines in the Waterjet Guidelines doc linked above

  • Clearly label the stock with the material (ie. 6061 Aluminum) and thickness

    • Also include a note if you’re intending to get multiple parts made from the same sheet of stock

  • Upload a DXF of the part to the NK_Waterjet_DXFs folder linked above

  • Fill out details about the part in the NK_Waterjet_Planning spreadsheet linked above