Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

P1P Bambu Printer

IMG_3658-20240930-021200.PNG

Build Plate Size: 256 × 256 × 256 mm³

Supported Filaments: PLA, PETG, TPU, PVA, PET; Enclosure required: PA, PC, ABS, ASA

Printing Instructions

  1. Download Bambu Studio (it’s free)

  2. Select region

    image-20240930-022846.png

  3. You don’t have to join the program

    image-20240930-022927.png

  4. Make sure the “Bambu Lab P1P” Printer with the 0.4 Nozzle is selected and click “Next”. You don’t have to worry about unselecting everything else.

    image-20240930-023053.png

  5. Filament selection page doesn’t matter too much, these are just the options that will show up on the slicer in the future so you could just leave the default and click “Next”. If you want to clear your screen a bit just have the following selected:

    image-20240930-023706.png

  6. Have this box check and click “Finish”

    image-20240930-023914.png

  7. Click “Login/Register” in the upper left and login with Google using nershipping@gmail.com and Racecar202 for the password

    image-20240930-024314.png

  8. You should now see the “NER 3D Printing” user profile in the top left corner

    image-20240930-024430.png

  • No labels