Turning on the machine
Flip the switch on the back right
Twist the E-stop button
Hit the physical reset button
Hit reset on the machine screen
Reference your axes, first Z, then X and Y (click ref next to each axis)
Setting up your tools
Select your tool
Endmills
Find the correct collet size for your tool and insert into holder
Insert tool into collet and torque to appropriate value
Drills
Insert drill into drill chuck and use spanner wrench to tighten down
Set the tool number to match the tool number in your cam
Check that the tool height setter is plugged in
Go to the offset tab and click set tool length
Repeat until all your tools are set up
Setting up your Work Holding
Select your method of workholding
Place on mill table
If you are using a vice or something else that needs to be square to the mill, retrieve the dial gauge
Locate the vice with bolts and ever so slightly tighten down
Zeroing your stock
Options for zeroing
Uploading your program
One job at a time
Starting the program
Single block
Feed down
Velocity down